Poland sends Ukraine 23 mm shells

Ukraine has sent Poland 5,000 23 mm APDS-T (Armour Piercing Discarding Sabot - Tracer) rounds to Ukraine as aid. The current type is currently unconfirmed, however it does seem as if they are 23 x 152 mm for ZU-23-2 anti-aircraft cannons. There is an option for Ukraine to receive another 66,000 23 mm rounds. 


Links: Breaking Defense, 23 x 152 mm shell specs

Comments

Post a Comment

Popular posts from this blog

5th tank to receive the PNM-T sighting complex

Image
Around the 22nd December it was officially confirmed that a T-90M Obr. 2017 had officially received the new PNM-T sighting complex, designed for Russian tank modernisations like the T-80BVM, T-72B3 Obr. 2016 and the T-90M. This T-90M Obr. 2017 is not new - four tanks before it had already received the sighting complex. But this time, it had also received a new sight cover, as shown below.  Compared to the old one, shown below is the fourth tank to receive the PNM-T sighting complex, a T-90MS Obr. 2015, shown during the JSC Roboronsexport live-stream on YouTube: The PNM-T is a supposed 640x512 matrix, MWIR (3 - 5 micrometres) sight developed by PJSC ANPP TEMP-AVIA in around 2018 to 2019. Its main purpose was to either completely replace the existing Sosna-U, that was mounted on most T-90M, T-90MS, T-72B3, T-80BVM and some T-90A tanks, ESSA, mounted exclusively on T-90A tanks and Plisa which is used on T-80UE-1 tanks. The sights mentioned above all use French CATHERINE-FC components ...
Read more

The Versuchsträger Gesamtschutz VTGS: An odd-looking Leopard

Image
The Leopard VTGS, officially known as the Versuchsträger Gesamtschutz VTGS in German, in English it means "Total Protection Test Vehicle", also known as the "Leopard Total Protection Testbed" or "Stealth Leopard" was a prototype testbed made to test new tank protection systems as a secondary goal, with its main goal being to test the reduction of IR and radar signatures on tanks.  The prototype was made by Pietzsch GmbH at the municipality of Schlangen, near the town of Paderborn in the mid-1980s. The VTGS was made upon the Leopard 1A3, presumably the 1972 - 1974 model from the fifth production batch, which had a welded turret replacing the famed cast turret. The image above shows a Leopard 1A2, presumably from the same batch, stripped down to see the cast turret. Next to it is the Leopard 1A3 from the ffith production batch with the welded turret. The tank's internal changes were made mainly to allow it to don its new "costume" or look, as t...
Read more