Changes made to recent Russian tank designs

 "According to unverified information from sources in the military-industrial complex, during the Syrian campaign, Uralvagonzavod specialists made about one and a half hundred technological changes to the design of tanks, both in service and promising (designs).

The T-14 was no exception. In the course of the military tests on the territory of the SAR (Syrian Arab Republic), a number of problematic solutions were identified regarding the level of sensitivity of the system for detecting incoming projectiles, an optical-location complex, and a power-plant."



Comments

Post a Comment

Popular posts from this blog

5th tank to receive the PNM-T sighting complex

Image
Around the 22nd December it was officially confirmed that a T-90M Obr. 2017 had officially received the new PNM-T sighting complex, designed for Russian tank modernisations like the T-80BVM, T-72B3 Obr. 2016 and the T-90M. This T-90M Obr. 2017 is not new - four tanks before it had already received the sighting complex. But this time, it had also received a new sight cover, as shown below.  Compared to the old one, shown below is the fourth tank to receive the PNM-T sighting complex, a T-90MS Obr. 2015, shown during the JSC Roboronsexport live-stream on YouTube: The PNM-T is a supposed 640x512 matrix, MWIR (3 - 5 micrometres) sight developed by PJSC ANPP TEMP-AVIA in around 2018 to 2019. Its main purpose was to either completely replace the existing Sosna-U, that was mounted on most T-90M, T-90MS, T-72B3, T-80BVM and some T-90A tanks, ESSA, mounted exclusively on T-90A tanks and Plisa which is used on T-80UE-1 tanks. The sights mentioned above all use French CATHERINE-FC components ...
Read more

The Versuchsträger Gesamtschutz VTGS: An odd-looking Leopard

Image
The Leopard VTGS, officially known as the Versuchsträger Gesamtschutz VTGS in German, in English it means "Total Protection Test Vehicle", also known as the "Leopard Total Protection Testbed" or "Stealth Leopard" was a prototype testbed made to test new tank protection systems as a secondary goal, with its main goal being to test the reduction of IR and radar signatures on tanks.  The prototype was made by Pietzsch GmbH at the municipality of Schlangen, near the town of Paderborn in the mid-1980s. The VTGS was made upon the Leopard 1A3, presumably the 1972 - 1974 model from the fifth production batch, which had a welded turret replacing the famed cast turret. The image above shows a Leopard 1A2, presumably from the same batch, stripped down to see the cast turret. Next to it is the Leopard 1A3 from the ffith production batch with the welded turret. The tank's internal changes were made mainly to allow it to don its new "costume" or look, as t...
Read more